tekla structure

[e.haghani]

با سلام


ایا امکان وارد کردن مدل از نرم افزار تکلا به نرم افزار pdms وجود داره؟

خروجی سه بعدی از تکلا به اتوکد وجود داره ایا امکانش هست با یه نرم افزار واسطه مثل bocad به pdms انتقال رو انجام داد؟

با تشکر

[فرشاد امن خانی]

Using Export To PDMS

Create export instance

• Open Tekla Structures model
• Click toolbar

Dialog opens

• Type preferred name
• Select content Filter (Filter/All/Selected)
• Select filter from the list columns
• Type folder, browse other folder with … or use default folder and press Add

In case Export is not done application asks if setting will be stored when pressing Close
Export instance

Prerequisite Create export instance

• Select instance or instances from dialog and press Export

Export file will be created and dialog row appears green.
Dialog shows created version as date time (UTC) yyyymmdd-hhmmss.

File is created as “Name”#”version”.ifcZIP. In Tekla Structures 21.0 version the file name extension is .tcZip




File includes also .dgn file in case it is needed to be used (e.g. polybeams in earlier TS versions than 21.0 ).
Standard Tekla IFC export attributes are used. Also property set
called ”PDMS” attributes can be used. This can be defined in Export to
IFC dialog and using Additional property sets.

Note: Do not change file name because it is used in revision handling when updates exported.


Note: New installations for Tekla Structures 20.0 and 20.1 and 21.0
(200.5.1 and 201.3.1 and 210.1.1) have a simplier user interface to
define attributes to be exported.




By pressing “Add” button new report fields or user defined
attributes can be added from option list. Already some standard
attributes (including weight) will be exported by default (can be seen
in Export to IFC dialog). Assembly or part level attributes can be used.
By pressing “Modify” new attribute definitions will be taken into
account and a new PDMS_PSets.xml file will be written to model under
AdditionalPSets folder. It can be also seen using Export to IFC dialog.
Note: When updated (revised) export used select same existing row and press Export.


Edit export instance

Prerequisite Create export instance

• Change export folder by picking …
• Open export folder by picking
• Remove instance by clicking

Export settings

• Click Tab page settings

Project origin symbol appears to model origin

• It is possible to change project origin and it’s location in the model.
• Changes need to be set with Modify

Note: New installations for Tekla Structures 20.0 and 20.1
(200.5.1 and 201.3.1) have a simplier user interface to define
attributes to be exported. This is described in previous chapter


منبع
https://teklastructures.support.tekla.co...rt_to_pdms

[e.haghani]

ممنونم
تو تکلا 19 این ایکون وجود نداره
یه خروجی با فرمت 3d dgn در tekla 19 هم هست. ایا این فرمت رو pdms میتونه بخونه؟